Eurotec MAGNUS M - timber connector for beam joints
Eurotec MAGNUS M - timber connector for beam joints
Eurotec Magnus L is used for joining wooden beams. The couplings can be milled into the wood to create an "invisible" joint. Thanks to the locking screws, Eurotec Magnus transmits the load in the structure in all directions. The couplings can also be fitted without milling, the aluminium joint remains visible, but the mechanical parameters (load) remain the same.
Magnus couplings significantly shorten the work on the actual construction. Thanks to the precision of the fitting, the assembly of the beams on site is considerably shortened (saving labour costs). The risk of the fastener not fitting correctly in the structure is also reduced. Beams prepared in this way, especially on large construction sites, can be stacked in a similar way to prefabricated components.
Quality and certified component also for industrial buildings (ETA certification).
Material: aluminium
Minimum beam dimensions (width x height):
| MAGNUS | Main beam (width x height) | Side beam (width x height) |
| MAGNUS M 70x120x17 mm | 80x140 mm | 100x140 mm |
| MAGNUS M 70x140x17 mm | 80x160 mm | 100x160 mm |
| MAGNUS M 70x160x17 mm | 80x180 mm | 100x180 mm |
| MAGNUS M 70x180x17 mm | 80x200 mm | 100x200 mm |
Packing: 1 pair/1 joint (including screws):
Example of Eurotec Magnus installation here:
| MAGNUS | H (mm) | W (mm) | D (mm) |
| M 70x120x17 mm | 120 | 70 | 17 |
| M 70x140x17 mm | 140 | 70 | 17 |
| M 70x160x17 mm | 160 | 70 | 17 |
| M 70x180x17 mm | 180 | 70 | 17 |
